Cobra Electronics LI 4900WXC Set DCS Privacy Codes, To select a DCS privacy code, Standby mode

Page 8

LI4900WX.qxp 11/21/2006 2:19 PM Page 10

Mode Functions

Operation

Set DCS Privacy Codes

•

Mode Button

To select a DCS privacy code:

 

1. After selecting a channel, press the Mode

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

NOAA* All Hazards Radio Channels

•

You can use your microTALK radio to listen to NOAA All Hazards Radio channels transmitting in your area.

 

button until the DCS icon appears and the

 

small numbers flash on the display

DCS Privacy Code

(01 through 83).

 

 

NOTE

 

If CTCSS is turned on at the channel

 

selected, the display will flash the

Channel Buttons

DCS icon and “OFF.” To switch from

CTCSS to DCS, press the Channel Up

 

 

or Channel Down button while the

 

display is flashing “OFF.” The display

 

will then show the small numbers

 

flashing and you will then be able

 

to proceed to step 2.

2. Press using the Channel Up or Channel Down

button to select a DCS privacy code. You can

hold the Up or Down button for fast advance.

Mode Button

Hazards Radio Icon

Channel Buttons

To listen to All Hazards Radio channels:

1.Press the Mode button until the WX (All Hazards Radio) icon, the currently selected All Hazards Radio channel, and signal strength are displayed.

2.Use the Channel Up or Channel Down button to change All Hazards Radio channels.

3.WX (All Hazards Radio) icon will continue to be displayed when All Hazards Radio is on. Choose one of the following:

a.Press the Mode button to proceed to other functions.

b.Press the Lock/Enter button to exit All Hazards Radio channels mode and return to Standby mode.

3. When your desired DCS privacy code is

displayed, choose one of the following:

a. Press the Mode button to enter the new

setting and proceed to other functions.

b. Press the Lock/Enter button to enter the

new setting and return to Standby mode.

c. Do not press any buttons for 15 seconds

to enter the new setting and return to

Standby mode.

*National Oceanographic and Atmospheric Adminstration

 

 

 

 

10

11

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Making Life Easier and Safer Product Features WarrantyFeatures Limited One-Year Warranty on Radios & ChargerEstimated operation time on full charge 10 hours Replace battery compartment cover and belt clipCaring for Your microTALK Radio Using Your Radio Insert radios into desktop charger as shownTo toggle between high and low power ChannelsOr Channel Down button Listening for a ResponseLock Feature Signal Strength MeterTo turn the lock feature on or off Auto Squelch/Maximum RangeMode Functions Scrolling through Mode FunctionsSet Ctcss Privacy Codes To select a Ctcss privacy codeStandby mode Set DCS Privacy CodesTo select a DCS privacy code NOAA* All Hazards Radio ChannelsTo turn VOX mode on or off Voice Activated Transmit VOXMemory Locations To set VOX sensitivityPress the Mode button to Choose one of the followingTo recall a stored memory channel location DisplayTo scan channels To de-program a memory locationChannel Scan Privacy Code Scan Press the Mode button to proceed to set privacyPress the Channel Up or Channel Down button to Memory Location Scan To scan memory locationsTo change call settings VibrAlert and Call AlertCall Tone Settings To change a call tone settingKeystroke Tones To change keystroke tonesGeneral Specifications General SpecificationsFCC Licensing Product Service Questions Safety Information for microTALK Radios Safety and Trademark AcknowledgementProduct Service
Top Page Image Contents