Mode Functions
Operation
The Scan icon will continue to be displayed when privacy code scan is on. Your radio will continue to scan privacy codes and stop as an incoming transmission is detected. Your radio will remain on that channel/privacy code for 10 seconds.
| Introduction |
| Customer Assistance |
| Warranty |
|
| Operation |
|
|
•
You can choose between five different Call Tone Settings to transmit a call alert.
While setting privacy code scan, if you do not press any buttons for 15 seconds your radio will automatically return to Standby mode on the channel/privacy code that was displayed before you entered mode functions.
During scanning (while receiving an incoming transmission),
Mode/Power
Call Tone Setting
To change a call tone setting:
1.Press the Mode/Power button until the letter “C” and the current call tone number (01 through 05) is displayed. The current call tone will sound for one second.
you can choose from the following:
a. Press and hold the Talk button to communicate on that channel/privacy code. Your radio will remain on that channel/privacy code and return to Standby mode.
b. Press the Channel Up or Channel Down button to resume scanning privacy codes.
If you press the Talk button while scanning and not within
10 seconds of receiving a transmission, you will transmit on the channel/privacy code on which you last received a transmission. This will return the radio to Standby mode.
If you do not press any button within 10 seconds, your radio will automatically resume scanning privacy codes.
During scanning (while not receiving a transmission), you can choose from the following:
a. Press and hold the Talk button to communicate on
the channel/privacy code that was displayed before you entered mode functions or the channel/privacy code on
| 2. Press the Channel Up or Channel Down button |
| |
| to hear the other call tone settings. |
| |
| 3. Choose one of the following: |
| |
| a. Press the Mode/Power button to |
| |
Channel Button | enter the new setting and proceed |
| |
| to other functions. |
| |
| b. Press the Lock button to enter the new setting | ||
| and return to Standby mode. |
| |
Roger Beep Confirmation Tone | • | ||
Your listener will hear an audible tone when you release the | |||
| |||
Talk button. This alerts the other party that you are finished |
| ||
talking and it is OK for them to speak. |
| ||
Mode/Power | To turn roger beep on or off: |
| |
| 1. Press the Mode/Power button until the |
| |
| Roger Beep icon flashes. The current |
| |
| on or off setting is displayed. |
| |
which, during scanning, you last received a transmission. This will return the radio to Standby mode.
b. Press the Mode/Power button to proceed to other functions.
c. Press the Lock button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the channel/privacy code on which,
during scanning, you last transmitted or received.
Roger Beep Off
Channel Button
2.Press the Channel Up or Channel Down button to select roger beep on or off.
3.Choose one of the following:
a.Press the Mode/Power button to enter the new setting and return to Standby mode.
b.Press the Lock button to enter the new setting and return to Standby mode.
|
| Nothing Comes Close to a Cobra® 13 |
|
12 |
| ||