Cobra Electronics LI 4900WX Listening for a Response, To toggle between high and low power

Page 5

Using Your Radio

Operation

Channel Buttons	Channels	•
		•

With the radio on, select any of the

22 channels by pressing the Channel Up or Channel Down button.

Introduction	Operation	Customer Assistance Warranty
Hi-Low Button	Selectable High•Low Power Output		•
			•

When in close proximity to another party or during favorable conditions, you can switch from High to Low Power to extend battery life.

Channel Number

Listening

Call Button

Both radios must be tuned to the same channel to communicate.

Channels 1 through 7 are shared by FRS and GMRS. Channels 8 through 14 are FRS only. Channels 15 through 22 are GMRS only.

See page 26 for FRS/GMRS frequency allocations and compatibility charts.

Listening for a Response

•

Release the Talk button to receive incoming transmissions. Your microTALK radio is always in Standby mode while the Talk or

Call buttons are not pressed.

Call Button

•

To alert another person that you are calling:

–Press and release the Call button.

The other person will hear a two second call tone. This tone is used only to establish voice communications.

See page 24 on how to select from 10 available call tone settings.

Hi Power Icon

Low Power Icon

Light/Max Range

This feature applies to GMRS Channels 1 through 7 and 15 through 22 only. Channels 8 through 14 operate exclusively on low power.

To toggle between high and low power:

–Press and release the Hi•Lo button.

When using Channels 1 through 7 and

15 through 22 on high power, the Hi icon will be visible on the display.

When using those channels on low power and on Channels 8 through 14, the Low icon will be visible on the display.

To Illuminate Display

•

Press and release the Light/Max Range button to illuminate the display for

10 seconds.

4

5

Image 5

Contents For Assistance in the U.S.A Making Life Easier and SaferAutomated Help Desk Customer Assistance OperatorsWarranty and Trademark Acknowledgement Product FeaturesLimited One-Year Warranty on Radios & Charger Trademark AcknowledgementEstimated operation time on full charge 10 hours Replace battery compartment cover and belt clipCaring for YourmicroTALKRadio Battery Low Using Your RadioAuto Battery Save For charging microTALK radios in desktop chargerListening for a Response To toggle between high and low powerCall Button To alert another person that you are calling To Illuminate DisplaySignal Strength Meter Lock FeatureAuto Squelch/Maximum Range MicroTALK RangeScrolling through Mode Functions Mode FunctionsPrivacy Codes Set Ctcss Privacy CodesSet DCS Privacy Codes Standby modeTo select a DCS privacy code NOAA* All Hazards Radio ChannelsVoice Activated Transmit VOX To turn VOX mode on or offMemory Locations To set VOX sensitivityChoose one of the following Press the Mode button toTo recall a stored memory channel location DisplayTo scan channels To de-program a memory locationChannel Scan Privacy Code Scan Press the Mode button to proceed to set privacyPress the Channel Up or Channel Down button to To scan memory locations Memory Location ScanVibrAlert and Call Alert To change call settingsCall ToneSettings Mode Functions General SpecificationsKeystroke Tones Roger Beep ConfirmationToneGeneral Specifications General Specifications FCC LicenseProduct Service Questions Product Service