Cobra Electronics LI 4900WX Set DCS Privacy Codes, To select a DCS privacy code, Standby mode

Page 8

Mode Functions

Operation

Set DCS Privacy Codes

Mode Button

To select a DCS privacy code:

 

1. After selecting a channel, press the Mode

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

NOAA* All Hazards Radio Channels

You can use your microTALK radio to listen to NOAA All Hazards Radio channels transmitting in your area.

 

button until the DCS icon appears and the

 

small numbers flash on the display

DCS Privacy Code

(01 through 83).

 

 

NOTE

 

If CTCSS is turned on at the channel

 

selected, the display will flash the

Channel Buttons

DCS icon and “OFF.” To switch from

CTCSS to DCS, press the Channel Up

 

 

or Channel Down button while the

 

display is flashing “OFF.” The display

 

will then show the small numbers

 

flashing and you will then be able

 

to proceed to step 2.

2. Press using the Channel Up or Channel Down

button to select a DCS privacy code. You can

hold the Up or Down button for fast advance.

Mode Button

Hazards Radio Icon

Channel Buttons

To listen to All Hazards Radio channels:

1.Press the Mode button until the WX (All Hazards Radio) icon, the currently selected All Hazards Radio channel, and signal strength are displayed.

2.Use the Channel Up or Channel Down button to change All Hazards Radio channels.

3.WX (All Hazards Radio) icon will continue to be displayed when All Hazards Radio is on. Choose one of the following:

a.Press the Mode button to proceed to other functions.

b.Press the Lock/Enter button to exit All Hazards Radio channels mode and return to Standby mode.

3. When your desired DCS privacy code is

displayed, choose one of the following:

a. Press the Mode button to enter the new

setting and proceed to other functions.

b. Press the Lock/Enter button to enter the

new setting and return to Standby mode.

c. Do not press any buttons for 15 seconds

to enter the new setting and return to

Standby mode.

*National Oceanographic and Atmospheric Adminstration

 

 

 

 

10

11

Image 8
Contents Making Life Easier and Safer For Assistance in the U.S.AAutomated Help Desk Customer Assistance OperatorsProduct Features Warranty and Trademark AcknowledgementLimited One-Year Warranty on Radios & Charger Trademark AcknowledgementEstimated operation time on full charge 10 hours Replace battery compartment cover and belt clipCaring for YourmicroTALKRadio Using Your Radio Battery LowAuto Battery Save For charging microTALK radios in desktop chargerTo toggle between high and low power Listening for a ResponseCall Button To alert another person that you are calling To Illuminate DisplayLock Feature Signal Strength MeterAuto Squelch/Maximum Range MicroTALK RangeMode Functions Scrolling through Mode FunctionsPrivacy Codes Set Ctcss Privacy CodesStandby mode Set DCS Privacy CodesTo select a DCS privacy code NOAA* All Hazards Radio ChannelsTo turn VOX mode on or off Voice Activated Transmit VOXMemory Locations To set VOX sensitivityPress the Mode button to Choose one of the followingTo recall a stored memory channel location DisplayTo scan channels To de-program a memory locationChannel Scan Privacy Code Scan Press the Mode button to proceed to set privacyPress the Channel Up or Channel Down button to Memory Location Scan To scan memory locationsTo change call settings VibrAlert and Call AlertMode Functions General Specifications Call ToneSettingsKeystroke Tones Roger Beep ConfirmationToneGeneral Specifications FCC License General SpecificationsProduct Service Product Service Questions