Operation | Operation |
|
|
To Transmit | To Transmit |
Transmit | Transmit |
Caution!
Be sure the antenna is properly connected to the radio before transmitting. Prolonged transmitting without an antenna, or a poorly matched antenna, could cause damage to the transmitter.
Be sure to read the F.C.C. Rules and Regulations included with this unit before transmitting.
Setting
Dynamike®
1Select desired channel.
Setting Dynamike®
This controls the microphone sensitivity (outgoing audio level).
1Initially, set fully clockwise so that maximum voice volume is available. Dynamike® may have to be reduced in some conditions.
1Push and hold mic button to transmit.Transmitter is now activated.When transmitting,hold the microphone two inches from your mouth and speak in a clear,normal voice. Release to receive.
Setting TalkBack | TalkBack |
This control is used to adjust the desired amount of modulation talk back that is present at the speaker during transmit. At fully
20 | 21 |