Cobra Electronics 29 LTD SE specifications Operation, Turning On, Setting Channel Selector

Page 5

Operation	Operation

Turning On

Make sure the power cord, antenna and microphone are connected to their proper connectors before starting.

1The CB/PA button should be in the CB position.

2Rotate the On/Off Volume knob clockwise to a normal listening level.

1Select one of forty channels and adjust volume. The selected channel is indicated by the LED readout directly above the channel selector knob

Image 5

Contents Antennas ContentsInstallation LocationLocation InstallationMounting and Connection Mounting and ConnectionInstallation Antennas Ignition Noise Interference Marine InstallationCB Antenna CB AntennaSetting Channel Selector Setting Channel SelectorOperation Turning OnCalibrate For SWR Standing Wave Ratio Select channel Switch to the CAL positionCalibrate for SWR Standing Wave Ratio Meter located on the rightTo Receive To ReceiveSelecting a SwitchChannel OFF NoiseRF Gain Control Bright/Dim SwitchBright/Dim Setting Squelch Setting Delta-Tune Setting SquelchSetting Delta-Tune Setting Dynamike Setting DynamikeSetting TalkBack TransmitExternal Speaker RF MeterRF Meter External SpeakerAddress PA PublicBase Station Operation From 120V AC House Current Home And Office Set-Up Temporary Mobile Set-UpTemporary Mobile Set-Up Base Station Operation From 120V AC House CurrentFew Rules You Should Know Channel Emergency Messages How Your CB Can Serve YouCB 10-Codes Standard questions and answers. These codesCB 10-Codes Noisy areas. Following are some of the moreFrequency Ranges For Products Purchased in the U.S.A Limited One Year Warranty Optional AccessoriesFor Products Purchased in Canada Optional Accessories CB transceiver If You Think YouNeed ServiceCB Story Automated Help Desk Customer SupportOrdering from Canada Ordering from U.S.A