Cobra Electronics 29 LTD SE specifications Bright/Dim Switch, RF Gain Control

Page 9

Bright/Dim

1Switch to BRT or DIM to control brightness of the channel indicator and multi-function meter for day or nighttime driving.

The RF Gain is used to optimize reception in strong or weak signal areas.

Note

The RF Gain is used to optimize reception in weak signal areas.

1Rotate the RF Gain knob counterclockwise to reduce gain in strong signal areas. In weak signal areas turn clockwise to increase gain.

Image 9

Contents Contents InstallationAntennas LocationLocation InstallationMounting and Connection Mounting and ConnectionInstallation Antennas Ignition Noise Interference Marine InstallationCB Antenna CB AntennaSetting Channel Selector Setting Channel SelectorOperation Turning OnCalibrate For SWR Standing Wave Ratio Select channel Switch to the CAL positionCalibrate for SWR Standing Wave Ratio Meter located on the rightTo Receive To ReceiveSelecting a SwitchChannel OFF NoiseBright/Dim Switch Bright/DimRF Gain Control Setting Delta-Tune Setting Squelch Setting Delta-TuneSetting Squelch Setting Dynamike Setting DynamikeSetting TalkBack TransmitExternal Speaker RF MeterRF Meter External SpeakerAddress PA PublicBase Station Operation From 120V AC House Current Home And Office Set-Up Temporary Mobile Set-UpTemporary Mobile Set-Up Base Station Operation From 120V AC House CurrentFew Rules You Should Know Channel Emergency Messages How Your CB Can Serve YouCB 10-Codes Standard questions and answers. These codesCB 10-Codes Noisy areas. Following are some of the moreFrequency Ranges Limited One Year Warranty Optional Accessories For Products Purchased in CanadaFor Products Purchased in the U.S.A Optional Accessories If You Think YouNeed Service CB StoryCB transceiver Automated Help Desk Customer SupportOrdering from Canada Ordering from U.S.A