Cobra Electronics 150GTLDX owner manual Specifications

	Specifications
Your Mobile Radio
Specifications	•
General
Frequency Range	28.0 to 29.7 MHz
Frequency Control	Phase Lock Loop (PLL) synthesizer
Frequency Stability	0.005%
Operating	-22°F to 122°F (-6°C to + 50°C)
Temperature Range
Antenna Impedance	50 ohms
Antenna Connector	Standard SO 239 type
Microphone	Plug-in dynamic with Press-To-Talk switch and coiled cord
Input Voltage	13.8 V DC nominal, 15.9 V max., 10.0 V min.
	(positive or negative ground)
Current Drain	Transmit: 3.0 A
	Receive (squelched): 0.5 A
	Receive (maximum audio output): 1.2 A
Size	23⁄8" (H) x 77⁄8" (W) x 93⁄4" (D)
	[6 cm (H) x 20 cm (W) x 24.8 cm (D)]
Weight	4.8 lbs.
Meter (3-in-1)	Illuminated – indicates relative output power,
	received signal strength, and SWR
Built-in Speaker	4 watts
Transmitter
Power Output	Low – 4 watts; High – 15 watts
Frequency Response	300 to 3,000 Hz
Frequency Tolerance	500 Hz
Transmit Distortion	2%
Spurious Harmonic	-65 dB
Emission
Output Indicators	Meter shows relative RF output power and SWR.
	Transmit LED glows red when transmitter is in operation.
Antenna Warning LED	Glows red when SWR is greater than 3.0.

2 English

	Specifications
Your Mobile Radio
Specifications	•
Receiver
Sensitivity	AM: 0.5 µV for 10 dB S/N
	FM: 0.25 µV for 12 dB S/N
Audio Frequency	300 to 3,000 Hz
Response
Maximum Signal	45 dB
to Noise Ratio
Image Rejection	75 dB
Adjacent	65 dB
Channel Rejection
RF Gain Control (AGC)	40 dB – adjustable for optimum signal reception
Squelch	Adjustable – threshold less than 0.5 µV
Automatic Noise	Switchable
Limiter (ANL)
Noise Blanker (NB)	Switchable
Receive Indicators	Meter shows relative signal strength.
	Receive LED glows green when receiving a signal.
PA System
Power Output	4 watts into PA speaker
Speaker for PA	8 ohms
(Not Supplied)
External Speaker
Power Output	4 watts into external speaker
External Speaker

(Not Supplied) 8 ohms

(Specifications subject to change without notice)

Nothing comes close to a Cobra® 3