BT A6 manual To switch the Freeway handset power on or OFF, To select a channel

Page 12

Freeway [A6] ~ 2nd Edition ~ 15th October ’01 – 4166

Using your Freeway handsets

To switch the Freeway handset power ON or OFF

Press and hold the POWER button for about 2 seconds.

You will hear a tone to indicate that the handset has been switched ON (or OFF).

To select a channel

Channel

Press the CHANNEL + or – button to select a channel from 1 to 8. To keep scrolling through the channels you can press and hold the + or – button and then release it when you reach the channel you want.

The selected channel will be shown on the display.

It is advisable to lock the keys once you have selected your channel to ensure it does not change, see below.

12

Image 12

Contents User Guide Explanation of the display icons Introduction UnpackingFor your records Safety instructions GeneralCleaning Setting up Installing the batteriesFreeway accessories Installing and removing the belt clip Battery low indicatorInstalling and removing the optional Freeway headset Freeway A6 ~ 2nd Edition ~ 15th October ’01 To switch the Freeway handset power on or OFF To select a channelTo switch the key lock on or OFF To call another handset Battery saver mode To listen for and talk to another handset userTo adjust the volume of incoming calls To manage unwanted callsTo change the code To switch the handset display light on or OFF To switch the squelch OFFTo switch the squelch OFF temporarily To switch the squelch OFF for longer periods of timeGuarantee General informationEMC Offices worldwide