BT A6 manual To adjust the volume of incoming calls, To manage unwanted calls

Page 16

Freeway [A6] ~ 2nd Edition ~ 15th October ’01 – 4166

To adjust the volume of incoming calls

l o V

Vol

l o V

Vol

Press the VOLUME + or – button to increase or decrease the volume of incoming calls.

The volume levels range from 1-8.

You can also press and hold the VOLUME + or – button to keep increasing or decreasing the volume until you reach the required level or until you reach the handset’s maximum or minimum level at which point you will hear a double beep.

The volume level (1-8) will be shown on the display for about 5 seconds, the display will then return to the channel number.

To manage unwanted calls

You can reduce interference from unwanted calls by setting up a code on your selected channel. You must then ensure that each member of your group is using the same code, if they do not, you will not be able to communicate with them.

If you set the code on your selected channel to 00 (OFF), you will hear calls from everyone within range who is using the same channel you have selected.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents User Guide Explanation of the display icons Introduction UnpackingFor your records Safety instructions GeneralCleaning Setting up Installing the batteriesFreeway accessories Installing and removing the belt clip Battery low indicatorInstalling and removing the optional Freeway headset Freeway A6 ~ 2nd Edition ~ 15th October ’01 To switch the Freeway handset power on or OFF To select a channelTo switch the key lock on or OFF To call another handset Battery saver mode To listen for and talk to another handset userTo adjust the volume of incoming calls To manage unwanted callsTo change the code To switch the handset display light on or OFF To switch the squelch OFFTo switch the squelch OFF temporarily To switch the squelch OFF for longer periods of timeGuarantee General informationEMC Offices worldwide
Top Page Image Contents