Audio-Technica 5000, 4000 manual Figure E AEW-R4100 Receiver Front Panel

Receiver Controls and Functions (Continued)

Figure E AEW-R4100 Receiver Front Panel

ON

POWER

ALERT

OFF

RX NAME

MODE/SET

PHONES MIN–LEVEL–MAX

UHF SYNTHESIZED DIVERSITY RECEIVER AEW-R4100

39 33 32 34 35 36 37 38 39

Front Panel Controls and Functions (Fig. E)

32 POWER SWITCH: Press Power switch in and the receiver readouts will light.

33 HEADPHONE OUTPUT: 1/4" (6.3 mm) TRS (“stereo”) phone jack. Plug in either a mono or “stereo” headphone to monitor receiver signal.

34 HEADPHONE LEVEL CONTROL: Adjusts the level of the headphone jack only; it does not affect receiver audio output.

35 ALERT INDICATOR: The Alert Indicator lights:

(a)When the receiver is in the Mute mode,

(b)When no RF signal is received from the transmitter,

(c)When only one or two RF signal-strength bars are on,

(d)When the transmitter is in the Mute mode,

(e)When audio modulation level from the transmitter is close to the clipping point (AF +6 bar), or

(f)When the “LOW BAT” warning appears in the LCD (transmitter battery is weak).

36 LCD WINDOW: Liquid Crystal Display indicates control settings and operational readings. See Figure G on page 13 for details.

37 UP/DOWN BUTTONS: Press Up or Down arrow buttons, in conjunction with the Mode/Set button, to step through menus, select operating frequency and edit receiver function choices.

38 MODE/SET BUTTON: Use in conjunction with the Up/Down arrow buttons to step through menus, choose operating frequency and select receiver function options.

39 MOUNTING ADAPTERS: For mounting the receiver in any standard 19" rack. Attach to the receiver with the screws supplied. (Use an optional AT8628a joining-plate kit to mount two AEW-R4100 receivers side by side.)

12