Audio-Technica 5000 Receiver Controls and Functions, Front Panel Controls and Functions Fig. C

Receiver Installation (Continued)

Ethernet connections (AEW-R5200): An RJ-45 jack on the rear panel of each AEW-R5200 provides an Ethernet 10 BaseT data/control connection from both of its channels to an external computer system. Data monitored includes actual, real-time “RF” and “AF” levels for receiver channels with direct Ethernet connections to the associated computer. All other linked receivers in a system supply control-function access and all their data – except for “RF” and “AF” levels – to the

computer connected to the Master receiver.

Multiple AEW-R5200 receivers in a system can each provide real-time “RF” and “AF” levels to the associated computer if each AEW-R5200 has its own Ethernet connection, through an Ethernet hub, to the computer.

Other than being able to “see” the “RF” and “AF” levels, all functions of all receivers in a linked system can be monitored and controlled from the computer connected to the Master receiver.

Details of the computer setup and operation will be found in a separate AEW Control Interface manual provided with AEW-R5200 receivers and 5000 Series systems.

Receiver Controls and Functions

Figure C AEW-R5200 Receiver Front Panel

UHF SYNTHESIZED DIVERSITY RECEIVER AEW-R5200

PUSH SEL

OUTPUT LEVEL

ON

POWER

OFF

RX NAME

MODE/SET

RX NAME

MODE/SET

PHONES MIN MAX

13 1 2 3 4 5 6 7 8 9 10 11 12 13

Front Panel Controls and Functions (Fig. C)

1POWER SWITCH: Press Power switch in and the receiver readouts will light.

2HEADPHONE OUTPUT: 1/4" (6.3 mm) TRS (“stereo”) phone jack. Plug in either a mono or "stereo" headphone to monitor receiver signal.

3HEADPHONE LEVEL CONTROL / CHANNEL SWITCH: Adjusts the level of the headphone jack only; it does not affect receiver audio output. Press-and-release the knob to switch between Channel 1 and Channel 2.

4HEADPHONE CHANNEL INDICATOR: Shows which receiver channel is feeding the monitor headphones.

Channel 1 / Channel 2

5 / 9 ALERT INDICATOR: The Alert Indicator lights:

(a)When the receiver is in the Mute mode,

(b)When no RF signal is received from the transmitter,

(c)When only one or two RF signal-strength bars are on,

(d)When the transmitter is in the Mute mode,

(e)When audio modulation level from the transmitter is close to the clipping point (AF +6 bar), or

(f)When the “LOW BAT” warning appears in the LCD (transmitter battery is weak).

6 / 10 LCD WINDOW: Liquid Crystal Display indicates control settings and operational readings. See Figure G on page 13 for details.

7 / 11 UP/DOWN BUTTONS: Press Up or Down arrow button, in conjunction with the Mode/Set button, to step through menus, select operating frequency and edit receiver function choices.

8 / 12 MODE/SET BUTTON: Use in conjunction with the Up/Down arrow buttons to step through menus, choose operating frequency and select receiver function options.

13FRONT-MOUNT ANTENNAS: Cables and panel connectors are included with the AEW-R5200 to permit attaching antennas at the front panel.

10