Receiver Controls and Functions (Continued)
To load (recall) a Preset:
1.Touch the Mode/Set button once to move to Menu mode.
2.Touch the Up arrow twice. LCD top line shows “PRESET.”
3.Touch the Mode/Set button once. “LOAD” (or “STORE”) appears in the LCD.
4.If needed, touch the Up arrow once to change the selection to “LOAD.”
5.Hold the Mode/Set button. The name of the currently loaded Preset appears on the second line of the LCD.
6.Touch the Up or Down arrow to cycle through the available choices, stopping on the desired choice.
7.Hold the Mode/Set button until “LOADED” appears briefly in the LCD. The receiver reverts to normal operation with the selected preset’s functions loaded. The top display line indicates the loaded preset and the bottom line the current frequency.
To revert to factory-default values:
1.Touch the Mode/Set button once to move to Menu mode.
2.Touch the Up arrow twice. “PRESET” shows in the LCD window.
3.Touch the Mode/Set button once. “LOAD” (or “STORE”) appears in the LCD.
4.Touch the Up arrow once, if needed, to change the selection to “LOAD.”
5.Hold the Mode/Set button. The name of the currently loaded Preset appears on the second line of the LCD.
6.Touch the Up/Down arrow buttons to cycle through the available choices until “DEF” appears in the display.
7.Hold the Mode/Set button to load the factory default settings. “LOADED” appears briefly in the LCD. The receiver then reverts to normal operation at
Note: Loading the default setting will also revert the receiver frequency to the default value of 541.500 (Band C) or 655.500 (Band D).
Receiver Functions |
|
|
|
|
Function Menu | Default Value | Choices (Edit) ▲▼ | ||
▲▼ Frequency | Lowest in band† | 200 discrete frequencies | Yes | |
▲▼ Scan**/*** | No value | Scan start |
| |
▲▼ Lock | NO.LOC | NO.LOC | ALL.LOC PC.LOC RX.LOC | Yes |
▲▼ Antenna Power** | OFF | OFF | ON | Yes |
▲▼ Squelch | - (one bar) | 15 steps, 2 dB each | No | |
▲▼ Meter | NORMAL | NORMAL | HOLD | Yes |
▲▼ Preset | PRESET | Press once, then select LOAD or STORE | Yes | |
▲▼ LOAD: | DEF | DEF (default), PRSET1 through PRSET5 | Yes | |
▲▼ STORE: | PRSET1 | PRSET1 through PRSET5 | Yes | |
▲▼ Quit (exit Menu) | QUIT | Press Mode/Set once to exit | ||
* Continue in the same Up/Down direction and choices “wrap around” to the other end of the range. **
*** Scan selection is not available when the receiver has been linked as a slave unit.
† Band C: 541.500 MHz; Band D: 655.500 MHz
Table 1. Receiver Functions
17