2.The GMRS200W has been designed to maximize performance and im- prove transmission range in the field. To avoid interference, it is recom- mended that you do not use the units closer than 5 feet apart.
3.For best transmission results, always keep your mouth about
4.To increase battery life, avoid the Scan feature. SCAN mode will reduce operating time considerably.
Warning
•Do not operate the transceiver unless you are licensed to do so.
•Remove the batteries from the transceiver if it is not expected to be used for long periods. This will eliminate the possibility of chemicals leaking from the batteries and corroding the transceiver.
•Avoid exposing the transceiver to water or extremes of temperature.
•Do not use this device in or near a mining facility, which uses remotely triggered explosives or in areas labeled “Blasting Area”. Accidental detonation may result.
•Do not attempt to modify or in any way increase the output of this transceiver. Its output is designed to meet the legal limits set by the FCC.
•Do not use this device or change its batteries in potentially explosive atmospheres as sparks in such areas could result in an explosion.
•Turn your transceiver off wherever posted notices restrict the use of radios or cellular telephones. Facilities such as hospitals may use equipment that is sensitive to RF energy.
12
128-6781
12 of 16