Installing and Removing Wrist/Arm Straps
Removing Wrist/Arm Straps
Remove the wrist/arm straps as follows:
1.Remove the battery as outlined on the preceding page.
2.Noting the arrow direction, push each strap from outside to inside, disengaging the strap pin from the side slot.
3.Continue to pull the strap through the slot and remove it from the radio. Save the strap pins for replacement use.
STRAP A 
STRAP B
Installing Wrist/Arm Straps
Install the wrist/arm straps as follows:
1.With the battery removed, orient strap A with the velcro side facing up away from the battery compartment, orient strap B with the velcro side facing down from the compartment.
2.Noting the arrow direction, insert the end of the strap through the square slot, and pull until the strap pin engages the stop below the strap slot.
STRAP A
STRAP B
6
128-6781
6 of 16