Juniper Networks M10i manual Replacing a PIC, Installing the HCM

M10i Internet Router Hardware Guide

5.Align the rear of the Routing Engine with the guide rails inside the chassis and slide it in completely.

CAUTION: Align the Routing Engine carefully with the guide rails and push it in evenly. Damage can result if it gets lodged in the rails because of uneven movement.

6.Tighten the thumbscrews on the Routing Engine faceplate to secure the Routing Engine.

7.Issue the show chassis hardware command described in “Maintaining Hardware Components” on page 73 to verify that the HCM is functioning correctly.

Figure 33: Installing the HCM

Figure 34: Installing a Routing Engine

Replacing a PIC

Up to eight regular PICs install into an M10i router, as shown in Figure 1. Quad-wide PICs occupy all four slots in an FPC row.

96■ Replacing a PIC