Juniper Networks M10i manual Part, Procedures

Table of Contents

Chapter 7	Installing the Mounting Hardware	51
	Moving the Mounting Brackets	51
	Installing the Cable Management System	52
Chapter 8	Installing the Router	55
	Tools and Parts Required	55
	Installing the Chassis in the Rack	55
Chapter 9	Connecting the Router	59
	Tools and Parts Required	59
	Connecting the Router to Management Devices	59
	Connecting to a Network for Out-of-Band Management	60
	Connecting to a Management Console or Auxiliary Device	60
	Connecting PIC Cables	61
	Providing Power to the Router	62
	Connecting Power to an AC-Powered Router	62
	Connecting Power to a DC-Powered Router	63
	Powering On the Router	65
Chapter 10	Performing the Initial Configuration	67
	Configuring the JUNOS Internet Software	67
Part 3	Hardware Maintenance, Troubleshooting, and Replacement
	Procedures
Chapter 11	Maintaining Hardware Components	73
	Routine Maintenance Procedures	73
	Maintaining the CFEB	73
	Maintaining the Fan Tray	74
	Maintaining PICs and PIC Cables	74
	Maintaining the Power Supplies	76
	Maintaining the Routing Engine	77
Chapter 12	Troubleshooting Hardware Components	79
	Overview of Troubleshooting Resources	79
	Command-Line Interface	79
	LEDs	80
	LEDs on the HCM	80
	LEDs on Hardware Components	80

Table of Contents ■ vii