Juniper Networks M10i manual Inserting the PC Card, Removing the PC Card

Chapter 13: Replacing Hardware Components

2.When the PC card pops partially out of the slot, grasp the card and pull it straight out of the slot.

Figure 47: Removing the PC Card

Inserting the PC Card

To insert the PC card, follow this procedure (see Figure 48):

1.Orient the PC card with the Juniper Networks logo facing in the direction specified on the Routing Engine faceplate. Insert the card into the slot.

2.Press the card firmly all the way into the slot. Note that the PC card slot might be located in a different position from that shown in Figure 48.

Replacing Routing Engine Components ■ 125