M10i Internet Router Hardware Guide

4.Shut down power to the router by pressing the power switch for all power supplies to the off (O) position. On both AC and DC power supplies, the switch is located on the power supply faceplate.

5.Disconnect power from the router. For instructions, see “Disconnecting and Connecting AC Power” on page 110 or “Disconnecting and Connecting DC Power” on page 116.

6.Remove the cables that connect to all external devices. For instructions, see

“Replacing Connectors to Routing Engine Interface Ports” on page 130 and “Removing a PIC” on page 97.

7.Remove all Field Replaceable Units (FRUs) from the router.

8.Remove the router from the rack:

If you are using a mechanical lift, place the lift platform under the router, unscrew and remove the mounting screws from the rack, and move the router to the shipping crate.

If you are not using a mechanical lift and the router weight is fully supported by a shelf or another router, unscrew and remove the mounting screws from the rack. Three people can then lift the router and move it to the shipping crate.

If you are not using a mechanical lift and the router weight is not fully supported by a shelf or another router, three people should grasp the router while a fourth person unscrews and removes the mounting screws from the rack. The three lifters can then move the router to the shipping crate.

9.Place the router in the shipping crate or onto the pallet. If on a pallet, bolt the router to the pallet.

10.Cover the router with an ESD bag and place the packing foam on top of and around the router.

11.Replace the accessory box on top of the packing foam.

12.Securely tape the box closed or place the crate cover over the router.

13.Write the RMA number on the exterior of the box to ensure proper tracking.

Packing Components for Shipment

To pack and ship individual components, follow these guidelines:

When you return components, make sure they are adequately protected with packing materials and packed so that the pieces are prevented from moving around inside the carton.

Use the original shipping materials if they are available.

196Packing Components for Shipment

Page 220
Image 220
Juniper Networks M10i manual Packing Components for Shipment