Juniper Networks M10i Laser and LED Safety Guidelines and Warnings, Class 1 Laser Product Warning

Appendix A: Safety and Regulatory Compliance Information

Aviso Não utilize uma rampa com uma inclinação superior a 10 graus.

¡Atención! No usar una rampa inclinada más de 10 grados

Varning! Använd inte ramp med en lutning på mer än 10 grader.

Laser and LED Safety Guidelines and Warnings

Single-mode Physical Interface Cards (PICs) are equipped with laser transmitters, which are considered a Class 1 Laser Product by the U.S. Food and Drug Administration, and are evaluated as a Class 1 Laser Product per EN 60825–1 +A11 +A2 requirements.

Observe the following guidelines and warnings:

■General Laser Safety Guidelines on page 159

■Class 1 Laser Product Warning on page 159

■Class 1 LED Product Warning on page 160

■Laser Beam Warning on page 161

■Radiation From Open Port Apertures Warning on page 161

General Laser Safety Guidelines

When working around PICs, observe the following safety guidelines to prevent eye injury:

■Do not look into unterminated ports or at fibers that connect to unknown sources.

■Do not examine unterminated optical ports with optical instruments.

■Avoid direct exposure to the beam.

WARNING: Unterminated optical connectors can emit invisible laser radiation. The lens in the human eye focuses all the laser power on the retina, so focusing the eye directly on a laser source—even a low-power laser—could permanently damage the eye.

Class 1 Laser Product Warning

WARNING: Class 1 laser product.

Safety Guidelines and Warnings ■ 159