Juniper Networks M10i manual EIA-530 PIC DB-25 Connector to V.35 Connector Pinout

M10i Internet Router Hardware Guide

■A V.35 connection requires an DB-25 to V.35 cable and connects to a V.35 data terminal equipment (DTE) 34-pin Winchester type male cable (one per port). Table 31 on page 204 describes the V.35 cable pinouts.

■An X.21 connection requires an DB-25 to X.21 cable and connects to a X.21 DTE DB-15 male cable. Table 32 on page 205 describes the X.21 cable pinouts.

Figure 65: EIA-530 PIC

Table 31: DB-25 Connector to V.35 Connector Pinout

DB-25 Pin	Signal	V.35 Pin	Description
2	TD	P	Transmit Data
14	TD	S	Transmit Data
3	RD	R	Receive Data
16	RD	T	Receive Data
4	RTS	C	Ready To Send
5	CTS	D	Clear To Send
6	DSR	E	Data Set Ready
20	DTR	H	Data Terminal Ready
24	XTC	U	DTE Transmit Clock
11	XTC	W	DTE Transmit Clock
15	TC	Y	Transmit Clock
12	TC	AA	Transmit Clock
17	RC	V	Receive Clock
9	RC	X	Receive Clock
1	FGND	A	Protective Ground
7	GND	B	Signal Ground

204■ X.21 and V.35 Cable Pinouts for EIA-530 PIC