The Lenbrook Group T7100, T7150 NiMH Battery Installation, AA Alkaline Batteries Installation

NiMH Battery Installation

Your radio uses one rechargeable Nickel-Metal Hydride Battery pack. These cells provide 13 hours of radio use; based upon 5/5/90 duty cycle (5% Transmit, 5% Receive, 90% Standby).

• To begin, slide the Ribbed Latch on the bottom of the

radio away from the back cover, or toward the contacts.
	Ribbed
• Slide and lift the back cover off.
	Latch
• Position the battery with the Motorola Logo side up, and
the charge contacts are facing the bottom of the radio.
Insert the top of the battery into the radio and push the
battery up and into the battery compartment to fit
tightly into place.
• Slide and snap the cover back into place.

AA Alkaline Batteries Installation

Your radio also uses 4 AA alkaline batteries. These cells provide 22 hours of radio use. Based upon 5/5/90 duty cycle.

•Push the Ribbed Latch on the bottom of the radio away from the battery door.

•Slide and lift the battery door off.

•Place AA batteries so that the + markings match the markings in the compartment.

•Slide and snap the battery cover into place.

Getting Started

12