
When the key tone feature is on, the Bell icon appears steady on the display, and the beep tones sound in response to each button activation.
Roger Beep Tone
The Roger Beep is a tone which is automatically transmitted whenever the PTT button is released . This tone alerts the receiving party that the trans- mission has been terminated intentionally.
To enable and disable the Roger Beep tone:
-From the FRS standby mode, press the Mode Button 6 times until rb appears on the display with the flashing Roger Beep icon ( ) and On or oF.
-Press the Up or Down Button to select the tone on or off as desired.
-Momentarily press the Power On/Off Button to confirm selection. When enabled, the tone icon ( ) appears steady on the display.
Call Ringer Selection Mode
The transceiver provides 5
To select your favorite call ringer melody:
-From the FRS standby mode, press the MODE button 7 times; CA will appear on the display, together with a flashing number between 1 and 5, and an appropriate call ring.
-Press the Up or Down Button to preview and hear the 5 available call melodies.
-Momentarily press the Power On/Off button to confirm your selection.
VOX Selection Mode
This option enables you to have
14