Konica Minolta manual Charging FRS-1000 Batteries P/N Frsrbat

Page 6

BATTERY

INSTALLATION

POLARITY

+

-

+

-

BATTERY

COMPARTMENT

COVER

BATTERY

COMPARTMENT COVER ARROW

The following guidelines will improve performance and provide longer operating times for the FRS-1000:

1.Do not mix old and new batteries.

2.Do not mix alkaline, standard (carbon-zinc) or rechargeable (Ni-MH)batteries.

3.If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and will void the warranty.

Charging FRS-1000 Batteries P/N FRSRBAT:

The rechargeable batteries, Part Number FRSRBAT, supplied with the unit, are charged by connecting the AC Adapter plug to the DC12V jack on the top of the unit, and setting the CHARGE switch to the ON position. Use only the AC Wall Adapter, Part Number FRS1-AD, that is supplied with the base unit. The CHG. LED indicator below the LCD display lights red during battery charge operation.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model FRS-1000 Family Radio Service Model FRS-1000 Model FRS-1000 Display Installing the Back-Up Batteries Charging FRS-1000 Batteries P/N Frsrbat Adapter Charge ON/OFF Switch Plug DC12VBASE Jackunit FRS-1000 Operational Modes Monitor/Display L/MON Button Power On/Off 16 ButtonAdjusting the Volume Push To Talk PTT ButtonMode Button Up Channel/Volume ButtonDown Channel/Volume Button Scan/Lock Mode ButtonFRS Operation Channel Selection Transmit Power Selection Mode Dual Watch Mode Key ToneCall Ringer Selection Mode VOX Selection ModeRoger Beep Tone Scan Operation Auto Key Lock Selection Mode Ctcss Scan OperationWeather Alert Mode Weather Band OperationChannel Selection Additional Functions Troubleshooting Problem Possible cause CorrectionMatch the setting Technical Specifications General FRS Channel Frequencies Channel Freq. MHzContinuous Tone Coded Squelch System Tone Frequencies in Hz Freq. HzDAY Limited Warranty
Top Page Image Contents