Konica Minolta manual FRS-1000 Operational Modes

Page 8

FRS-1000 OPERATIONAL MODES

WEATHER BAND

FRS BAND

CHANNEL SELECT (WX/MODE/CH)

BUTTON BEEP (WX/MODE,MODE/ On/oF)

NOTE:

CHANNEL SELECT

CTCSS SELECT

POWER SELECT

DUAL

WATCH

KEY TONE

ROGER BEEP

CALL SELECT

To switch between FRS and Weather Band modes, momentarily press the FRS/WX button. To differentiate between operating modes, look for HI or LO indication below the battery power level indicator when in FRS mode. In Weather Band mode, these indications are not present. Refer to the appropriate section of this manual for detailed operating instructions for each mode.

8

Image 8

Contents Model FRS-1000 Family Radio Service Model FRS-1000 Model FRS-1000 Display Installing the Back-Up Batteries Charging FRS-1000 Batteries P/N Frsrbat Adapter Charge ON/OFF Switch Plug DC12VBASE Jackunit FRS-1000 Operational Modes Power On/Off 16 Button Adjusting the VolumeMonitor/Display L/MON Button Push To Talk PTT ButtonUp Channel/Volume Button Down Channel/Volume ButtonMode Button Scan/Lock Mode ButtonFRS Operation Channel Selection Transmit Power Selection Mode Dual Watch Mode Key ToneRoger Beep Tone Call Ringer Selection ModeVOX Selection Mode Scan Operation Auto Key Lock Selection Mode Ctcss Scan OperationChannel Selection Weather Alert ModeWeather Band Operation Additional Functions Troubleshooting Problem Possible cause CorrectionMatch the setting Technical Specifications General FRS Channel Frequencies Channel Freq. MHzContinuous Tone Coded Squelch System Tone Frequencies in Hz Freq. HzDAY Limited Warranty