Uniden DXI5586-2 manual Symptom Suggestion

Page 37

Symptom	Suggestion

The handset doesn't ring or	• Re-register both handsets (see page 13).
receive a page.	• The battery pack may be weak. Charge the battery for 15-20 hours.
	• The handset may be too far away from the main base.
	• Place the main base away from appliances or metal objects.
	• Change the digital security code (see page 32).
	• Check the battery pack to ensure there is a secure connection.
	• Make sure ringer volume isn’t set to “off.”

Severe noise interference.	• Keep both handsets away from microwave ovens, computers, remote control toys,
	wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights,
	and electrical appliances.
	• Move the main base to another location or turn off the source of interference.

The Caller ID does not display.	• The call was answered before the second ring.
	• The call was placed through a switchboard.
	• Charge the handset.
	• Your Caller ID service may not be active; contact your local telephone service
	provider.

Handset No. 1 or No. 2 is not	• Make sure the battery pack is connected to the handset and fully charged.
working.	• Re-register the non-functional handset.

Unavailable message is	• Make sure the other handset is not already in use. Both handsets cannot be in talk
displayed on the LCD screen of	mode at the same time.
the handset.	• Place the handset in the main base for at least 5 seconds to re-register to the
	main base.
	• Make sure the handset is not too far from the main base when trying to use.

www.uniden.com	T R O U B L E S H O O T I N G [ 37 ]

T R O U B L E S H O O T I N G

Image 37

Contents Page Contents Welcome Features Controls and Functions Main Base Extra Charging Cradle for Second Handset Terms Used in this Manual AccessibilityChoose the Best Location Installing the PhoneDo the following steps Avoid microwave ovensInstall the Rechargeable Battery Packs into the Handsets Do not use any other AC adapter Modular Mount the Main Base on a Wall Standard wall plate mounting Direct wall mounting Installing the BeltclipTo attach the beltclip To remove the beltclipHeadset Installation Register Handsets to the Main Base before UsingWhen to Re-register Handsets Activating AutoTalk Basic SetupActivating Caller ID on Call Waiting Entering Your Area Code Choosing the Dialing ModeSelecting the Ring Tone and Volume Setting the LanguageMaking and Receiving Calls Using Your PhoneMaking a call Receiving a callTo transfer a call Transferring a CallTo receive a transfer call from the second handset Redialing the Last Dialed NumberTone Dialing Switch-over Adjusting the Earpiece VolumeTemporarily Mute Ringer Selecting a Different Channel Traveling Out-of-RangeFind Handset Voice Mail Waiting Indicator Using Call WaitingStoring Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryIf you make a mistake while entering a name John DOE MOM and DAD Storing Caller ID Messages in Speed Dial Memory Making Calls from Speed Dial Memory To cancel speed dialingCaller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID Message List Deleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Caller ID on Call Waiting Cidcw Making a Call from the Caller ID ListChanging the Digital Security Code Battery replacement and handling Low battery alertPower Failure Talk and Standby Times Cleaning the battery charging contactsGeneral Information Battery InformationAC Adapter Information FrequencySymptom Suggestion Charge/in use LED or TroubleshootingSymptom Suggestion Symptom Suggestion Case Action Liquid DamageImportant Safety Instructions PrecautionsFCC Wants You To Know Cordless Telephone Privacy One Year Limited WarrantyTerminal Equipment Radio Equipment G, H, I, J, K, L IndexMemo Memo E M O R Y L I S T Need a Part? Help for our Special Needs Customers At Uniden, well take care of you