Uniden DXI5586-2 manual Liquid Damage, Case Action

Page 39

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps.

Case

Action

If the handset or base is exposed to

Wipe off the liquid, and use as normal.

moisture or liquid, but it only affects

 

the exterior plastic housing.

 

 

 

If moisture or liquid has entered the

Handset:

plastic housing (i.e. liquid can be

1. Remove the battery cover and leave it off for ventilation.

heard in the phone or liquid has

2. Remove the battery pack by disconnecting.

entered the handset battery

3. Leave the battery cover off and the battery pack disconnected for at least 3 days.

compartment or vent openings on the

4. Once the phone is completely dry, reconnect the battery pack and the battery cover.

base).

5. Recharge the handset’s battery pack for 20 hours before using again.

Base:

1.Disconnect the AC adapter from the base unit, cutting off electrical power.

2.Disconnect the telephone cord from the base unit.

3.Let dry for at least 3 days.

IMPORTANT: You must unplug the telephone line while recharging the battery pack to avoid charge interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven.

After following these steps, if your cordless telephone does not work, please call our Customer Service Hotline at 1-800-297-1023.

www.uniden.com

T R O U B L E S H O O T I N G [ 39 ]

T R O U B L E S H O O T I N G

Image 39
Contents Page Contents Welcome Features Controls and Functions Main Base Extra Charging Cradle for Second Handset Terms Used in this Manual AccessibilityAvoid microwave ovens Installing the PhoneChoose the Best Location Do the following stepsInstall the Rechargeable Battery Packs into the Handsets Do not use any other AC adapter Modular Mount the Main Base on a Wall Standard wall plate mounting To remove the beltclip Installing the BeltclipDirect wall mounting To attach the beltclipHeadset Installation Register Handsets to the Main Base before UsingWhen to Re-register Handsets Basic Setup Activating AutoTalkActivating Caller ID on Call Waiting Entering Your Area Code Choosing the Dialing ModeSelecting the Ring Tone and Volume Setting the LanguageReceiving a call Using Your PhoneMaking and Receiving Calls Making a callRedialing the Last Dialed Number Transferring a CallTo transfer a call To receive a transfer call from the second handsetAdjusting the Earpiece Volume Tone Dialing Switch-overTemporarily Mute Ringer Traveling Out-of-Range Selecting a Different ChannelFind Handset Voice Mail Waiting Indicator Using Call WaitingStoring Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryIf you make a mistake while entering a name John DOE MOM and DAD Storing Caller ID Messages in Speed Dial Memory Making Calls from Speed Dial Memory To cancel speed dialingCaller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID Message List Deleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Caller ID on Call Waiting Cidcw Making a Call from the Caller ID ListChanging the Digital Security Code Low battery alert Battery replacement and handlingPower Failure Talk and Standby Times Cleaning the battery charging contactsFrequency Battery InformationGeneral Information AC Adapter InformationSymptom Suggestion Charge/in use LED or TroubleshootingSymptom Suggestion Symptom Suggestion Case Action Liquid DamagePrecautions Important Safety InstructionsFCC Wants You To Know Cordless Telephone Privacy One Year Limited WarrantyTerminal Equipment Radio Equipment G, H, I, J, K, L IndexMemo Memo E M O R Y L I S T Need a Part? Help for our Special Needs Customers At Uniden, well take care of you