C. Connect the Main Base and Charging Cradle, and Charge the Handsets
1) Connect each AC adapter to the DC IN 9V jack and to each standard 120V AC wall outlet.
2) Place one handset in the main base and the other in the charging cradle with the keypad facing forward.
3) Make sure that the charge/in use LED and charge LED illuminate. If the LED does not illuminate, check to see that the AC
adapter is plugged in and that the handset makes good contact with the cradle's charging contacts.
• Connect the AC adapter to a continuous power supply.
•Place each cradle close to the AC outlet to avoid long extension cords.
4)Charge your handsets at least
plugging the phone line.
•Use only the supplied
Do not use any other AC adapter.
•Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.
INSTALLING THE PHONE
www.uniden.com | I N S TA L L I N G T H E P H O N E [ 9 ] |