Using the Intercom
You can use the intercom to talk to another station without using the phone line.
Making an Intercom Page
From the base | From the handset | |||
. With the phone in standby, press [int’com] | . With the phone in standby, press [xfer/ | |||
([hold/ int’com/xfer] on the |
| intercom]. | ||
All other stations will be paged. (On the dual- | 2. | Use [ ] or [ ] to select the station you want | ||
keypad base, press [1] through [4] to select the |
| to talk with, then press [select/ ]. Select ALL to | ||
handset you want to talk with or press [*/tone] to |
| page all other stations. | ||
page all other stations.) | 3. | To cancel the intercom page, press [ |
| ]. |
2. To cancel the intercom page, press [int’com] |
| |||
|
|
|
| |
([hold/int’com/xfer] on the |
|
|
|
|
Note: Intercom paging will be canceled if any of the following things occur:
–You receive an outside call or an intercom page while selecting the other handset.
–You do not select a handset within 30 seconds.
–The party does not answer the page within one minute.
–The party is busy.
–The party is out of range (UNAVAILABLE appears in the display).
Answering an Intercom Page
When the intercom page tone sounds, the display will show the ID of the station that is paging.
.From the handset, press [ /flash] or [xfer/intercom]. If AutoTalk is on, the handset will automatically answer the page when you remove the handset from the cradle.
2.From the base, press [int’com] ([hold/int’com/xfer] on the
3.To hang up an intercom page from the handset, press [ ]. To hang up an intercom page from the base, press [int’com] ([hold/int’com/xfer] on the
41