Room/Baby Monitor
This feature allows you to monitor sounds in another room. |
| |||
Place a station in the room you wish to monitor; it will function as | Handset #2 | |||
a microphone. Any handset can be set to function as a remote | at remote location | |||
speaker, allowing you to monitor sounds in the room. | ||||
| ||||
. Press [menu/clear] and enter the ROOM MONITOR |
| |||
| menu. TO ROOM MONITOR appears in the display. |
| ||
2. | Use [ ] or [ | ] to select the station you want to monitor. |
| |
3. | Press [select/ | ]. ROOM MONITOR appears, and you |
| |
| hear sounds in the room where the station is installed. | Handset #1 | ||
4. | To turn off the room monitor, press [ ] or return the | |||
near child | ||||
| handset to the cradle. |
|
Note: |
|
|
This feature only works when handsets are within the range of the |
|
|
|
| |
base. | To Room | Monitor |
If the party is out of range, UNAVAILABLE appears in the display, | Handset | #2 |
and the operation will be canceled. |
|
|
While a pair of handsets is in Room/Baby Monitoring, they cannot be
used to make or receive calls. Other handsets can still make and receive calls. You cannot listen from the base; the base can only function as a microphone.
42