Uniden DCT758 manual Liquid Damage

Page 64

Symptom

Suggestion

The answering system does not

Make sure the base is plugged in.

Make sure that the answering system is turned on.

work.

Make sure that the message record time is not set to announce only.

 

Time stamp cannot be heard.

Make sure you have set the time (see Setting the Day and Time on

 

page 17).

 

 

Messages are incomplete.

• Incoming messages may be too long. Ask callers to leave a brief

 

message.

 

The memory may be full. Delete some or all of the saved messages.

There is no sound on the base

Adjust the speaker volume on the base or handset.

or handset speaker during call

Make sure the call screen feature is set to on.

monitoring or message review.

 

 

 

Make sure you are using the correct PIN number.

Cannot access answering

Make sure that the touch-tone phone you’re using can transmit the

system from a remote phone.

 

tone for at least two seconds. If it cannot, try using a different touchtone

 

 

phone.

Liquid Damage

Moisture and liquid can damage your cordless phone.

If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal.

If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow the steps below:

63

Image 64
Contents Page Table of Contents Using Your Phone Using Caller ID and Call WaitingAdjusting the Ringer, Earpiece and Speaker Volume Finding a Lost Handset Using Hold, Conference and TransferTroubleshooting Using the Answering SystemPrecautions Accessibility WelcomeTerminology Used in this Manual BaseAnswering System Features Main Phone FeaturesProduct Overview Parts of the Handset Xfer/intercom keyParts of the Answering System Base DCT758 Use LED Flash key Find hs key findTone key Reading the Display Using the InterfaceIcon Status Description Using the Handset Menus Using the Four-way Function KeyStandby Screen Entering Text from Your Handset Installing the Phone Choosing the Best LocationWall Mounting the Base AD-800 AC adapterInstalling the Battery Connecting to the Phone Line Connecting the Base and Charging the HandsetTesting the Connection Changing the Dial Mode Installing the Belt ClipBasic Setup Setting the Day and TimeSetting the day and time, the phone will exit the menu Selecting a LanguageActivating Personal Ring Activating the Key Touch ToneCompatible Handsets Adding Accessory HandsetsDCX640 DCX700 DCX750 Charging Accessory Handsets Registering Accessory HandsetsRegistering DCX750 Handsets Resetting HandsetsRegistering DCX640 or DCX700 Handsets Setting Up the Phonebook Creating Phonebook EntriesSpeed Dial No Selectn SPD1Empty Editing an Existing Phonebook Entry Finding a Phonebook EntryStoring Caller ID or Redial Numbers in the Phonebook Copying Phonebook Entries to Another Handset Deleting Phonebook EntriesDeleting all the phonebook entries at once Programming Base Speed Dial Numbers Dual Keypad Model Only Customizing Your Phone Deleting Base Speed Dial NumbersChanging the Handset Banner . Press menu/clearSelecting a Ring Tone Handset Only Activating AutoTalk Handset onlyActivating Any Key Answer Handset only Using Your Phone Switching to the Handset Speakerphone During a Call Making a Call from the PhonebookChain dialing from the Phonebook Making a Call with Handset Speed DialUsing the Caller ID List Using Caller ID and Call WaitingMaking a Call from a Caller ID Record Using Call Waiting Deluxe Using Call WaitingDeleting Caller ID Numbers Redialing a Number Deleting a Redial RecordFrom the dual-keypad base From the handset Press speaker Then press redial/pauseAdjusting the Ringer, Earpiece and Speaker Volume Adjusting the Ringer VolumeAdjusting the Earpiece Volume Adjusting the Speaker VolumeUsing Hold, Conference and Transfer Using the Clarity Boost FeatureFinding a Lost Handset Placing a Call on HoldConferencing Transferring a CallFrom the base From the handset Flash orUsing Special Features Answering a Transferred CallDo Not Disturb All Calls Muting the Ringer One Call OnlyPrivacy Mode Muting the MicrophoneSeven-Digit Dialing Press menu/clearMaking a DirectLink Call Using the DirectLink Communication FeatureExiting DirectLink Communication Making an Intercom From the base From the handset Using the IntercomIntercom Room/Baby Monitor Tone Dialing Switch Over Installing the Optional HeadsetFeatures Setting Up the Answering SystemVoice Prompts Using the Answering System Interface Selecting the LanguageBase operation Handset operationSetting the Number of Rings Press /select or /select untilSetting the Day & Time Select or Select untilSelect or Select until you Press select Select or Select until youRecording a Personal Greeting Selecting a GreetingSetting the Record Time or Announce Only Deleting Your Personal GreetingActivating Call Screening Activating the Message AlertPress /select or /select to choose Select or /select Using the Answering System Turning Your Answering System On and OffReviewing Messages Turning OnScreening Calls Recording a Conversation Turning Off the Message Alert Tone Recording a Voice MemoOperating the Answering System While You Are Away from Home Page Maintenance SpecificationsPower Failures Battery LifeBattery Replacement and Handling Low Battery AlertChange the Batteries Annually Clean the Battery Contacts TroubleshootingResetting the Handset Resetting the Handset Without the Base Changing the Digital Security CodeSymptom Suggestion Common IssuesTraveling Out of Range Accessory Handsets on Liquid Damage Handset Base Precautions Important Safety InstructionsFCC Wants You To Know Radio Interference One Year Limited Warranty Important Evidence of original purchase is required forIndex Call waiting deluxePIN Memo Remote access Away from home Remote Operation CardTask At Uniden, we’ll take care of you