Uniden DCT758 manual Conferencing, Transferring a Call, From the base From the handset, Flash or

Conferencing

If you have more than one handset, up to four people can participate in a conference call. A three-way conference call consists of an outside line and two stations. A four-way conference call consists of an outside line, the base speaker phone, and two handsets. You can easily join a call already in progress.

From the handset, press [ /flash] or [ ] to join the call. From the base, press [speaker]. You can hang up normally; the other station will still be connected to the call.

Transferring a Call

You can transfer a call from one station to another.

Handset #2

Outside call

Base

Handset #1

From the base	From the handset
. During a call, press [int’com] ([hold/int’com/	. During a call, press [xfer/intercom].
xfer] on the dual-keypad base).	2. Use [ ] or [	] to select the station you want
2. The call will automatically be placed on hold, and	to transfer the call to, then press [select/		]. The
a paging tone sounds on all stations. (On the	call will automatically be placed on hold, and a
dual-keypad base, you can select the handset	paging tone sounds. To cancel the transfer, press
you want to talk with by pressing [1] through	[ /flash] or [	].
[4], or press [*/tone] to page all registered	3. When another station accepts the transferred
handsets.) To cancel the transfer, press	call, you will be disconnected. If you want to
[speaker] or [int’com] ([hold/int’com/xfer]).	rejoin the call, press [ /flash] again or [		].
3. When another station accepts the transferred
call, you will be disconnected. If you want to
rejoin the call, press [speaker] again.

37