Uniden DECT4066-4, DCX400 Setup the Handsets, Place the phone on the wall, Install the battery

Page 5

Place the phone on the wall

Place the mounting slots over the pins on the wall plate, and slide the base

down to

lock it

into place.

(To telephone jack

for second line)

Setup the Handset(s)

Install the battery

1. Unpack all handsets, battery packs, and battery covers. If any handset has the battery cover already attached, press in

on the notch and slide the cover down and off.

2. Line up the battery pack connector with the jack inside the handset. (The battery connector will only fit one way.)

3. Push the battery pack connector in until it clicks into place. Tug gently on the wires to make sure the battery pack is securely connected.

4. Place the cover over the battery compartment and slide it up into place.

3

Image 5

Contents Whats in the box? DECT4066 Series Users GuideYou might also ﬁnd Phone NumberWhats in the manual? Important Safety InstructionsAttach the stand Installing Your PhoneSet Up the Base Connect Connect the power and telephone cordsTelephone cord Here firstPlace the phone on the wall Setup the HandsetsInstall the battery Try Charge the batteryTest Line Test the ConnectionUnavailable Check orChanging from Tone to Pulse Dialing Attaching the Belt ClipDisplay Getting to Know Your PhoneParts of the Base Base keys and how they work Parts of the Handset Handset keys and how they work On the handset Reading the DisplaysOn the base Base Icon Handset Icon What it means Soft keys in the main menu Using the Soft KeysSoft keys with the phone in standby What it does Common soft key descriptionsEntering Text on Your Phone Handset Setup Using the MenusMenu option Use it to Display. Enter any name up to 10 characters Menu option Use it toSet Line Special Feature MenusAssigning a primary line Using Your PhoneWorking with Two Lines Conferencing two lines together Using the Caller ID and Redial Lists Changing the VolumeChange When On the base On a handset HighDialing from the CID or redial list Using the listsCaller ID and redial menu options Store into PBUsing Call Waiting Using Seven-Digit DialingFinding a Lost Handset Using an Optional HeadsetSetting Up Your Phonebook Using the PhonebookCreating a new entry Edit NameEditing an existing entry Chain Dialing Phonebook Menu OptionsExpanding Your Phone Using Multi-station FeaturesUsing Multi-Station Conference Calling From the base From a handset Using Privacy ModeUsing Call Transfer Using the Intercom Using Do Not Disturb Using Special FeaturesUsing the Alarm Feature Setting an alarmTuesday When an alarm ringsSetting Up Your Voice Mail Using a Voice Mail ServiceGetting your messages Resetting the voice message indicatorSays Unavailable Solving ProblemsIf… Try… Letting calls ring at least twice before answering Status and keep the battery charged Handset Setup , then select T-coilWeak or Hard To Hear Audio Noise or Static On The LineOn 1 handset or in 1 location Here are some hints for when the static isRegistering a handset Resetting and Registering HandsetsDo you have the base the handset is registered to? Yes Does the handset fit in the base cradle? YesHandset Base Handling Liquid DamageTerms Used In This Guide Important InformationCompliance Information FCC Part 15.105b FCC Part 15 informationTerminal equipment Radio equipment RF exposure information574,727 581,598 606,598 650,790 660,269 663,981 671,248