Uniden DCX400, DRX402, DECT4066-3, DECT4066-5, DECT4066-2, DECT4066-4 manual Charge the battery, Try

Page 6

Charge the battery

1. If your phone came with any accessory handsets and chargers, connect a charger AC adapter to each charger's

AC IN 8V jack and set the plug into the notch as shown. (These adapters might already be connected.)

If you have a DRX402 MULTIRANGETM accessory, see the user's guide that came with the accessory for detailed installation and placement instructions.

2.Plug the other end of the adapter into a standard 120V AC power outlet.

3.Place one handset in the base and any other handsets in a charger with

the displays

facing forward.

(It doesn't

matter which handset

you place in the base.) The CHARGE lights on the base and all chargers should turn on.

If...	Try...

a CHARGE	- reseating the handset.
light doesn't	- checking the AC adapter connection.
turn on	- seeing if the outlet is controlled by a wall switch.

Charge all handsets completely (about 16 hours) before using them.

4

Image 6

Contents You might also ﬁnd DECT4066 Series Users GuideWhats in the box? Phone NumberImportant Safety Instructions Whats in the manual?Installing Your Phone Set Up the BaseAttach the stand Telephone cord Connect the power and telephone cordsConnect Here firstSetup the Handsets Install the batteryPlace the phone on the wall Charge the battery TryUnavailable Test the ConnectionTest Line Check orAttaching the Belt Clip Changing from Tone to Pulse DialingGetting to Know Your Phone Parts of the BaseDisplay Base keys and how they work Parts of the Handset Handset keys and how they work Reading the Displays On the baseOn the handset Base Icon Handset Icon What it means Using the Soft Keys Soft keys with the phone in standbySoft keys in the main menu Common soft key descriptions What it doesEntering Text on Your Phone Using the Menus Handset SetupMenu option Use it to Menu option Use it to Display. Enter any name up to 10 charactersSpecial Feature Menus Set LineUsing Your Phone Working with Two LinesAssigning a primary line Conferencing two lines together Change When On the base On a handset Changing the VolumeUsing the Caller ID and Redial Lists HighCaller ID and redial menu options Using the listsDialing from the CID or redial list Store into PBUsing Seven-Digit Dialing Using Call WaitingUsing an Optional Headset Finding a Lost HandsetCreating a new entry Using the PhonebookSetting Up Your Phonebook Edit NameEditing an existing entry Phonebook Menu Options Chain DialingUsing Multi-station Features Using Multi-Station Conference CallingExpanding Your Phone Using Privacy Mode Using Call TransferFrom the base From a handset Using the Intercom Using the Alarm Feature Using Special FeaturesUsing Do Not Disturb Setting an alarmWhen an alarm rings TuesdayUsing a Voice Mail Service Setting Up Your Voice MailResetting the voice message indicator Getting your messagesSolving Problems If… Try…Says Unavailable Letting calls ring at least twice before answering Weak or Hard To Hear Audio Handset Setup , then select T-coilStatus and keep the battery charged Noise or Static On The LineHere are some hints for when the static is On 1 handset or in 1 locationDo you have the base the handset is registered to? Yes Resetting and Registering HandsetsRegistering a handset Does the handset fit in the base cradle? YesHandling Liquid Damage Handset BaseImportant Information Terms Used In This GuideCompliance Information FCC Part 15 information FCC Part 15.105bRF exposure information Terminal equipment Radio equipment574,727 581,598 606,598 650,790 660,269 663,981 671,248