Uniden DXI4286-2 manual Register Handsets to the Main Base before Using

Page 13

Register Handsets to the Main Base before Using!

Whichever handset you choose to charge in the main base will automatically register to the main base.

The second handset (charging in the extra charging cradle) MUST also be registered to the main base before use. Follow the steps below to register the second handset.

1)Be sure both handsets are fully charged.

2)Remove the handset from the charging cradle, and place it in the main base. The charge/ in use LED light on the main base will begin to flash, indicating that the registration is taking place.

3)Wait for at least 5 seconds, then remove the handset from the main base.

4)Press the find hs key on the main base. If both handset beep, registration is complete. If one handset does not beep, re-register that handset.

5)Once both handsets are registered, it doesn’t matter which handset is placed in the main base or the charger.

note

•When you charge the handsets, Caller ID summary screen and the name of the handset, HS1 appears. If HS2 appears, you are charging the handset No. 2.

•The charging cradle can be used to charge either handset.

	R
T
	E
O
BE	G I
T
F	S
H
O	T
E
R	ER
M E
A
U	H
I
S	A
N
I	N
N
D B
G	S
A
!
E T S E
	S

w w w . u n i d e n . c o m

R E G I S T E R H A N D S E T S T O T H E M A I N B A S E B E F O R E U S I N G ! [ 1 2 ]

Image 13

Contents 4286-2 Contents Welcome Features Handsets Controls and FunctionsMain Base Terms Used in this ManualAccessibility Choose the Best Location Installing the PhoneDo the following steps Install the Rechargeable Battery Packs into the Handsets Charging contacts Mount the Main Base on a Wall Standard wall plate mounting Direct wall mounting Installing the BeltclipHeadset Installation Register Handsets to the Main Base before Using When to Re-register Handsets Activating AutoTalk Basic SetupActivating Caller ID on Call Waiting Entering Your Area Code Vol Choosing the Dialing ModeSelecting the Ring Tone and Volume Setting the LanguageMaking and Receiving Calls Using Your PhoneMaking a call Receiving a callRedialing the Last Dialed Number Transferring a CallTo transfer a call To receive a transfer callTone Dialing Switch-over Adjusting the Earpiece VolumeTemporarily Mute Ringer Selecting a Different Channel Traveling Out-of-RangeFind Handsets Voice Mail Waiting Indicator Using Call WaitingStoring Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryIf you make a mistake while entering a name S I N G T H E S P E E D D I a L M E M O R Y Storing Caller ID Messages in Speed Dial Memory Making Calls from Speed Dial Memory To cancel speed dialingCaller ID and Cidcw Caller ID on Call Waiting When a private number is receivedViewing the Caller ID Message List Deleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Caller ID on Call Waiting Cidcw Making a Call from the Caller ID ListChanging the Digital Security Code Battery replacement and handling Low battery alertTalk and Standby Times Cleaning the battery charging contactsAC Adapter Information General InformationCharge/in use LED or TroubleshootingTroubleshooting Troubleshooting 3 Case Action Liquid DamagePrecautions One Year Limited Warranty Terminal Equipment Radio Equipment G, H, I, J, K, L IndexMemo Memory List At Uniden, well take care of you G I S T E R O N L I N E T O D AY