Uniden DXI4286-2 manual Charging contacts

Page 9

C. Connect the Main Base and Charging Cradle,

	and Charge the Handsets	Route the cord.
		Route the cord.
1)	Connect each AC adapter to the DC IN 9V jack and to each
	standard 120V AC wall outlet.
2)	Place one handset in the main base and the other in the
	charging cradle with the keypad facing forward.
3)	Make sure the charge/in use LED and charge LED illuminate.
	If the LED does not illuminate, check to see that the AC adapter is
	plugged in and the handset makes good contact with the cradle's
	charging contacts.

• Connect each AC adapter to a continuous power supply.

• Place each cradle close to the AC outlet to avoid long extension cords.

4) Charge your handsets at least 15-20 hours before plugging the phone line.

5) Once the handset battery packs are fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet.

If your telephone outlet isn't modular, contact your telephone company for assistance.

Modular

!

•Use only the supplied

AD-0001 AC adapter for the main base and AD-310 or AD-1010 for the charging cradle.

Do not use any other AC adapter.

•Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.

I N S T A L L I N G T H E P H O N E

w w w . u n i d e n . c o m

I N S T A L L I N G T H E P H O N E [ 8 ]

Image 9

Contents 4286-2 Contents Welcome Features Handsets Controls and FunctionsMain Base Terms Used in this ManualAccessibility Installing the Phone Choose the Best LocationDo the following steps Install the Rechargeable Battery Packs into the Handsets Charging contacts Mount the Main Base on a Wall Standard wall plate mounting Direct wall mounting Installing the BeltclipHeadset Installation Register Handsets to the Main Base before Using When to Re-register Handsets Basic Setup Activating AutoTalkActivating Caller ID on Call Waiting Entering Your Area Code Vol Choosing the Dialing ModeSelecting the Ring Tone and Volume Setting the LanguageMaking and Receiving Calls Using Your PhoneMaking a call Receiving a callRedialing the Last Dialed Number Transferring a CallTo transfer a call To receive a transfer callAdjusting the Earpiece Volume Tone Dialing Switch-overTemporarily Mute Ringer Traveling Out-of-Range Selecting a Different ChannelFind Handsets Voice Mail Waiting Indicator Using Call WaitingStoring Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryIf you make a mistake while entering a name S I N G T H E S P E E D D I a L M E M O R Y Storing Caller ID Messages in Speed Dial Memory Making Calls from Speed Dial Memory To cancel speed dialingCaller ID and Cidcw Caller ID on Call Waiting When a private number is receivedViewing the Caller ID Message List Deleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Caller ID on Call Waiting Cidcw Making a Call from the Caller ID ListChanging the Digital Security Code Battery replacement and handling Low battery alertTalk and Standby Times Cleaning the battery charging contactsAC Adapter Information General InformationCharge/in use LED or TroubleshootingTroubleshooting Troubleshooting 3 Case Action Liquid DamagePrecautions One Year Limited Warranty Terminal Equipment Radio Equipment G, H, I, J, K, L IndexMemo Memory List At Uniden, well take care of you G I S T E R O N L I N E T O D AY