You must subscribe to Caller ID service through your local telephone provider to use this feature.
1) When the phone is in standby mode, press and hold the call id/ menu key. The following screen appears.
2) Press the 
/vol/ 
key to select CIDCW.
3) Press the select/channel key to toggle and turn on Caller ID on Call Waiting.
4) Press the end key and return the handset to main base to complete the setting. The handset returns to standby mode.
Entering Your Area Code
If you can make a call by dialing only 7 digits (instead of 10), you can program your local area code in your phone. If you get a call from within your area code, you'll only see the 7- digit phone number. If you get a call from outside your area code, you'll see all 10 digits.
1) When the phone is in standby mode, press and hold the call id/ menu key. The following screen appears.
2) Press the 
/vol/ 
key twice to select Area Code.
3) Press the select/channel key. If an area code was already stored, the phone will display it.
[ 1 5 ] B A S I C S E T U P | w w w . u n i d e n . c o m |