Uniden DXI4286-2 manual Troubleshooting, Charge/in use LED or

Page 37

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please call our Customer Hotline at 1-800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. Phone support is closed on holidays.)

	Symptom	Suggestion

	The charge/in use LED or	• Make sure the AC adapter is plugged into the cradle and wall outlet.
	charge LED won't illuminate
	charge LED won't illuminate	• Make sure the handset is properly seated in the cradle.
	when the handset is placed in	• Make sure the handset is properly seated in the cradle.
	when the handset is placed in	• Make sure the charging contacts on the handsets are clean.
	the cradle.
	the cradle.

	The audio sounds weak and/or	• Move the handset and/or main base away from metal objects or appliances and try again.
	scratchy.	• Press the select/channel key in the talk mode to help eliminate background noise.
		• Make sure that the handset is not too far from the main base.

	Can't make or receive calls.	• Re-register both handsets (see page 12).
		• Check both ends of the telephone line cord.
		• Make sure the AC adapter is plugged into the main base and wall outlet.
		• Disconnect the AC adapter for a few minutes. Then reconnect it.
		• Change the digital security code (see page 32).
		• Make sure that the handset is not too far from the main base.
		• Check the dialing mode used by your telephone company.

w w w . u n i d e n . c o m

T R O U B L E S H O O T I N G [ 3 6 ]

T R O U B L E S H O O T I N G

Image 37

Contents 4286-2 Contents Welcome Features Handsets Controls and FunctionsMain Base Terms Used in this ManualAccessibility Choose the Best Location Installing the PhoneDo the following steps Install the Rechargeable Battery Packs into the Handsets Charging contacts Mount the Main Base on a Wall Standard wall plate mounting Direct wall mounting Installing the BeltclipHeadset Installation Register Handsets to the Main Base before Using When to Re-register Handsets Activating AutoTalk Basic SetupActivating Caller ID on Call Waiting Entering Your Area Code Vol Choosing the Dialing ModeSelecting the Ring Tone and Volume Setting the LanguageMaking and Receiving Calls Using Your PhoneMaking a call Receiving a callRedialing the Last Dialed Number Transferring a CallTo transfer a call To receive a transfer callTone Dialing Switch-over Adjusting the Earpiece VolumeTemporarily Mute Ringer Selecting a Different Channel Traveling Out-of-RangeFind Handsets Voice Mail Waiting Indicator Using Call WaitingStoring Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryIf you make a mistake while entering a name S I N G T H E S P E E D D I a L M E M O R Y Storing Caller ID Messages in Speed Dial Memory Making Calls from Speed Dial Memory To cancel speed dialingCaller ID and Cidcw Caller ID on Call Waiting When a private number is receivedViewing the Caller ID Message List Deleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Caller ID on Call Waiting Cidcw Making a Call from the Caller ID ListChanging the Digital Security Code Battery replacement and handling Low battery alertTalk and Standby Times Cleaning the battery charging contactsAC Adapter Information General InformationCharge/in use LED or TroubleshootingTroubleshooting Troubleshooting 3 Case Action Liquid DamagePrecautions One Year Limited Warranty Terminal Equipment Radio Equipment G, H, I, J, K, L IndexMemo Memory List At Uniden, well take care of you G I S T E R O N L I N E T O D AY