Setting the main base Ringer Volume
You will hear three ringer options. One allows you to turn the ringer off. The other two are volume levels. You can change the ringer volume while in standby mode or the incoming call is ringing.
1) Press the ringer key. |
|
| |
You hear the ringer at the current volume level ([ | ] | ||
high, [ | ] low, [ | ] off) (if you set the main base |
|
ringer volume to off, "Ringer off " is announced) and it is displayed on the main base.
2) Press the ringer key repeatedly until the desired ringer option appears.
3) The system displays the new ringer volume.
Temporarily Mute the main base Ringer and Call Screen
Press the 
(play/stop) key to temporarily mute the incoming ring and call screen. The ringer will sound with the next incoming call. To turn the ringer back on for this call, press the ringer key. To hear the answering machine and screen this call, press the
or 
/volume/select key.
Adjusting the Speaker Volume Level
You can adjust the volume of the main base speaker by pressing the 
or 
/volume/select key on the main base. Press the 
/volume/select key for louder or the 
/volume/select key for softer while the main base speaker is being used except for menu mode. The numbers [ 
] 
] are displayed on the main base indicating the volume levels. [ 
] being the softest and [ 
] being the loudest.
note
Although you have set the main base ringer to off, you will still hear the ringer from the handset on the main base if its ringer is on.
T H E I N T E G R A T E D A N S W E R I N G D E V I C
w w w . u n i d e n . c o m | T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 4 2 ] |
E