Uniden DXAI7288-2 manual On the LCD screen Same time Handset

Page 57

	Symptom	Suggestion

	The handset doesn't ring or	• Re-register both handsets (see page 12).
	receive a page.	• The battery pack may be weak. Charge the battery for 15-20 hours.
		• The handset may be too far from the main base.
		• Place the main base away from appliances or metal objects.
		• Check the battery pack to ensure there is a secure connection.
		• Make sure ringer volume isn't set to "off."

	Severe noise interference.	• Keep both handsets away from microwave ovens, computers, remote control toys, wireless
		microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
		appliances.
		• Move the main base to another location or turn off the source of interference.

	The Caller ID does not display.	• The call was answered before the second ring.
		• The call was placed through a switchboard.
		• Charge the handset.
		• Your Caller ID service may not be active; contact your local telephone service provider.

	Handset No.1 or No.2 is not	• Make sure the battery pack is connected to the handset and fully charged.
	working.	• Re-register the non-functional handset.

	Unavailable message is displayed	• Make sure the other handset is not already in use. Both handsets cannot be in talk mode at the
	on the LCD screen of the	same time.
	handset.	• Place the handset in the main base for at least 5 seconds to re-register to the main base.
		• Make sure the handset is not too far from the main base when trying to use.

w w w . u n i d e n . c o m		A D D I T I O N A L I N F O R M A T I O N [ 5 6 ]

A D D I T I O N A L I N F O R M A T I O N

Image 57

Contents Dxai Contents Itad Welcome FeaturesHandsets Controls and FunctionsMain Base Extra Charging Cradle for Second Handset Terms Used in this ManualInstalling the Phone Choose the Best LocationDo the following steps Install the Rechargeable Battery Packs into the Handsets Use only the supplied Standard wall plate mounting Mount the Main Base on a WallDirect wall mounting Installing the BeltclipHeadset Installation Register Handsets to the Main Base before Using Call Transfer Feature When to Re-register HandsetsTo transfer a call To receive a transfer callBasic Setup Activating AutoTalkActivating Caller ID on Call Waiting Entering Your Area Code Choosing the Dialing Mode Selecting the Ring Tone and Volume Setting the LanguageMaking and Receiving Calls Using Your PhoneMaking a call Receiving a callAdjusting the Earpiece Volume Redialing the last dialed numberTemporarily Mute Ringer Tone Dialing Switch-over Traveling Out-of-RangeSelecting a Different Channel Find Handsets Using Call WaitingStoring the RocketDial RocketDialStoring Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryPress 7 eight times If you make a mistake while entering a nameS I N G T H E S P E E D D I a L M E M O R Y Storing Caller ID Messages in Speed Memory Locations Making Calls from Speed Dial Memory To cancel speed dialingCaller ID and Cidcw Caller ID on Call Waiting When the Telephone RingsViewing the Caller ID Message List Deleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Making a Call from the Caller ID List Integrated Answering Device FeaturesTurning the Answering System On/Off Answering System Settings Setting Up Your Answering SystemSetting the Time Setting a Personal Security Code PIN Setting the Ring Time Selecting the Message Record Time Announce only featureSetting the Message Alert Tone Setting Your Outgoing Message Greeting Preset messageSelecting the Language Choosing between the two outgoing messages Recording a personal outgoing message GreetingSetting the main base Ringer Volume Adjusting the Speaker Volume LevelTemporarily Mute the main base Ringer and Call Screen Playing Your Messages Using Your Answering SystemRepeating a Message Skipping a Message Deleting a Message Recording a Conversation Voice MemoRemote Operation Remote Access away from HomeFunction Turn on the Answering System Remotely Changing the Digital Security Code Battery replacement and handling Low battery alertCleaning the battery charging contacts AC Adapter Information General InformationCharge in use LED or TroubleshootingOn the LCD screen Same time Handset Handset doesn’t Case Action Liquid DamagePrecautions Installation Considerations Terminal Equipment Radio Equipment G, H, I, J, K, L IndexMemo Remote Operation Card Memory Location Memo Remote Operation CardTask Key Please do not Return this Product to the Place of Purchase Register Online Today