Uniden DXAI7288-2 manual Use only the supplied

Page 9

C. Connect the Main Base and Charging Cradle, and Charge the Handsets

1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

2) Place one handset in the main base and the other in the charging cradle with the keypad facing forward.

3) Make sure the charge in use LED and charge LED illuminate. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the cradle's charging contacts.

• Connect each AC adapter to a continuous power supply.

• Place each cradle close to the AC outlet so that you can unplug the AC adapter easily.

4) Charge your handsets at least 15-20 hours before plugging into the phone line.

5)Once the handset battery packs are fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet.

If your telephone outlet isn't modular, contact your telephone company for assistance.

Modular

w w w . u n i d e n . c o m

!

•Use only the supplied

AD-314 AC adapter for the main base and AD-310 for the charging cradle.

Do not use any other AC adapter.

•Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.

G E T T I N G S T A R T E D [ 8 ]

G E T T I N G S T A R T E D

Image 9

Contents Dxai Contents Itad Welcome FeaturesHandsets Controls and FunctionsMain Base Extra Charging Cradle for Second Handset Terms Used in this ManualInstalling the Phone Choose the Best LocationDo the following steps Install the Rechargeable Battery Packs into the Handsets Use only the supplied Standard wall plate mounting Mount the Main Base on a WallDirect wall mounting Installing the BeltclipHeadset Installation Register Handsets to the Main Base before Using Call Transfer Feature When to Re-register HandsetsTo transfer a call To receive a transfer callBasic Setup Activating AutoTalkActivating Caller ID on Call Waiting Entering Your Area Code Choosing the Dialing Mode Selecting the Ring Tone and Volume Setting the LanguageMaking and Receiving Calls Using Your PhoneMaking a call Receiving a callAdjusting the Earpiece Volume Redialing the last dialed numberTemporarily Mute Ringer Tone Dialing Switch-over Traveling Out-of-RangeSelecting a Different Channel Find Handsets Using Call WaitingStoring the RocketDial RocketDialStoring Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryPress 7 eight times If you make a mistake while entering a nameS I N G T H E S P E E D D I a L M E M O R Y Storing Caller ID Messages in Speed Memory Locations Making Calls from Speed Dial Memory To cancel speed dialingCaller ID and Cidcw Caller ID on Call Waiting When the Telephone RingsViewing the Caller ID Message List Deleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Making a Call from the Caller ID List Integrated Answering Device FeaturesTurning the Answering System On/Off Answering System Settings Setting Up Your Answering SystemSetting the Time Setting a Personal Security Code PIN Setting the Ring Time Selecting the Message Record Time Announce only featureSetting the Message Alert Tone Setting Your Outgoing Message Greeting Preset messageSelecting the Language Choosing between the two outgoing messages Recording a personal outgoing message GreetingSetting the main base Ringer Volume Adjusting the Speaker Volume LevelTemporarily Mute the main base Ringer and Call Screen Playing Your Messages Using Your Answering SystemRepeating a Message Skipping a Message Deleting a Message Recording a Conversation Voice MemoRemote Operation Remote Access away from HomeFunction Turn on the Answering System Remotely Changing the Digital Security Code Battery replacement and handling Low battery alertCleaning the battery charging contacts AC Adapter Information General InformationCharge in use LED or TroubleshootingOn the LCD screen Same time Handset Handset doesn’t Case Action Liquid DamagePrecautions Installation Considerations Terminal Equipment Radio Equipment G, H, I, J, K, L IndexMemo Remote Operation Card Memory Location Memo Remote Operation CardTask Key Please do not Return this Product to the Place of Purchase Register Online Today