note 
•When you charge the handsets, Caller ID summary screen and the name of the handset, HS1 appears. If HS2 appears, you are charging the handset No. 2.
•The charging cradle can be used to charge either handset.
Register Handsets to the Main Base before Using!
Whichever handset you choose to charge in the main base will automatically register to the main base.
The second handset (charging in the extra charging cradle) MUST also be registered to the main base before use. Follow the steps below to register the second handset.
1)Be sure both handsets are fully charged.
2)Remove the handset from the charging cradle, and place it in the main base. The charge/ in use LED light on the main base will begin to flash, indicating that the registration is taking place.
3)Wait for at least five seconds, then remove the handset from the main base.
4)Press the find hs key on the main base. If both handsets beep, registration is complete. If one handset does not beep,
5)Once both handsets are registered, it doesn’t matter which handset is placed in the main base or the charger.
[ 1 3 ] R E G I S T E R H A N D S E T S T O T H E M A I N B A S E B E F O R E U S I N G ! | w w w . u n i d e n . c o m |