Uniden DXAI4288-2 manual Handset doesn’t

	Symptom	Suggestion
	The handset doesn’t
	communicate with the main base	• Re-register both handsets (see page 13).
	or the other handset.
	No 3-way conversation.	• Only one handset at a time can talk with an outside caller. To allow the other handset to talk to
		the caller, transfer the call.
	The answering system does not	• Make sure the AC adapter is plugged into wall outlet.
	work.	• Make sure the answering system is turned on.
	The answering system does not	• Set the record time to either the one minute or four minute option.
	record any messages.	• The memory may be full. Delete some or all of the saved messages.
	Messages are incomplete.	• The incoming messages may be too long. Remind callers to leave a brief message.
		• The memory may be full. Delete some or all of the saved messages.
	After a power failure, the	• Record your personal outgoing message again. The default message should remain.
	outgoing message is deleted.
	No sound on the main base
	speaker during call monitoring	• Adjust the speaker volume on the main base.
	or message playback.
	Cannot access remote call-in	• Make sure you're using the correct PIN code.
	features from another touch-	• Make sure that the touch-tone phone you're using can transmit the tone for at least two
	tone phone.	seconds. If it cannot, you may have to use another phone to access your messages.
w w w . u n i d e n . c o m		T R O U B L E S H O O T I N G [ 5 8 ]

T R O U B L E S H O O T I N G