Uniden DXAI4288-2 manual Troubleshooting, Charge/in use LED or

Page 57

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please call our Customer Hotline at 1-800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. Phone support is closed on holidays.)

	Symptom	Suggestion

	The charge/in use LED or	• Make sure the AC adapter is plugged into the cradle and wall outlet.
	charge LED won't illuminate
	charge LED won't illuminate	• Make sure the handset is properly seated in the cradle.
	when the handset is placed in	• Make sure the handset is properly seated in the cradle.
	when the handset is placed in	• Make sure the charging contacts on the handsets are clean.
	the cradle.
	the cradle.

	The audio sounds weak and/or	• Move the handset and/or main base away from metal objects or appliances and try again.
	scratchy.	• Press the select/channel key in the talk mode to help eliminate background noise.
		• Make sure that the handset is not too far from the main base.

	Can't make or receive calls.	• Re-register both handsets (see page 13).
		• Check both ends of the telephone line cord.
		• Make sure the AC adapter is plugged into the main base and wall outlet.
		• Disconnect the AC adapter for a few minutes. Then reconnect it.
		• Change the digital security code (see page 52).
		• Make sure that the handset is not too far from the main base.
		• Check the dialing mode used by your telephone company.

w w w . u n i d e n . c o m

T R O U B L E S H O O T I N G [ 5 6 ]

T R O U B L E S H O O T I N G

Image 57

Contents Dxai Contents Welcome Features Handsets Controls and Functions28 29 30 Main BaseExtra Charging Cradle for Second Handset Terms Used in this ManualC E S S I B I L I T Y AccessibilityInstalling the Phone Choose the Best LocationDo the following steps Install the Rechargeable Battery Packs into the Handsets Extension cords Standard wall plate mounting Mount the Main Base on a WallDirect wall mounting Installing the BeltclipHeadset Installation Register Handsets to the Main Base before Using When to Re-register Handsets Basic Setup Activating AutoTalkActivating Caller ID on Call Waiting S I C S E T U P 1 Entering Your Area CodeVol Choosing the Dialing ModeSelecting the Ring Tone and Volume Setting the LanguageMaking and Receiving Calls Using Your PhoneMaking a call Receiving a callRedialing the Last Dialed Number Transferring a CallTo transfer a call To receive a transfer callAdjusting the Earpiece Volume Tone Dialing Switch-overTemporarily Mute Ringer Traveling Out-of-Range Selecting a Different ChannelFind Handsets Using Call Waiting Storing Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryIf you make a mistake while entering a name W . u n i d e n . c o m Storing Caller ID Messages in Speed Dial Memory Making Calls from Speed Dial Memory To cancel speed dialingCaller ID and Cidcw Caller ID on Call Waiting When a private number is receivedViewing the Caller ID Message List Deleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Caller ID on Call Waiting Cidcw Making a Call from the Caller ID ListIntegrated Answering Device FeaturesAnswering System Settings Setting Up Your Answering SystemSetting the Time Setting a Personal Security Code PIN Setting the Ring Time Selecting the Message Record Time Setting the Message Alert ToneSelecting the Language Preset message Setting Your Outgoing Message GreetingChoosing between the two outgoing messages Recording a personal outgoing message GreetingSetting the Main Base Ringer Volume Adjusting the Speaker Volume LevelTemporarily Mute the Main Base Ringer and Call Screen Turning the Answering System On/Off Playing Your Messages Using Your Answering SystemRepeating a Message Skipping a Message Deleting a Message Recording a Conversation Voice MemoRemote Operation TipFunction Turn on the Answering System Remotely Changing the Digital Security Code Battery replacement and handling Low battery alertTalk and Standby Times Cleaning the battery charging contactsAC Adapter Information General InformationCharge/in use LED or TroubleshootingTroubleshooting Handset doesn’t Case Action Liquid DamagePrecautions One Year Limited Warranty Terminal Equipment Radio Equipment AC adapter information Answering system IndexRemote Operation Card Memory Location Memo Remote Operation CardTask Key At Uniden, well take care of you G I S T E R O N L I N E T O D AY