Uniden DXI665 important safety instructions Direct Wall Mounting

3.Place the Base Unit on the posts of the wall plate and push down until it’s firmly seated.

4.Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch.

5.Plug one end of the short telephone cord into the TEL LINE jack on the Base Unit.

RING VOL	PULSE-TONE DC IN 9V
OFF-LO-HI	TEL LINE

Note: Charge the Handset for 15-20 hours without interruption before plugging the phone line into your new phone. See page 24, Initial Battery Charging.

Direct Wall Mounting

If you do not have a standard wall plate, you can mount your phone directly on a wall. Before mounting your phone, consider the following:

∙Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

∙Make sure the wall material is capable of supporting the weight of the Base Unit and Handset.

∙Use #10 screws with anchoring devices suitable for the wall material where the Base Unit will be placed.

14