Uniden DXI665 important safety instructions Entering the Local Area Code

To reestablish communication between the Handset and Base Unit:

1.Restore power to the Base Unit.

2.Place the Handset back on the Base Unit.

3.The Battery icon will blink to indicate that the Digital Security Code is set.

Entering the Local Area Code

❉Please refer to the foldout in front of your operating guide for key positions.

You must enter your local area code for the Caller ID redial features to work properly.

To enter your local area code:

1.Remove the Handset from the Base Unit.

2.Press flash/function twice.

3.Enter your local area code. For example, 817.

AREA CODE 1-

AREA CODE 1-817

4.Press mem. A confirmation tone sounds and the display remains on for two seconds.

5.Place the Handset on the Base. The Battery icon will blink to indicate that the area code is stored.

STORING

6 CALLS

26