Uniden DS 805 Quick Reference Chart, Handset rechargeable battery pack may need charging

Page 22

PHONE

QUICK REFERENCE CHART

If your phone is not performing to your expectations, please try these simple steps first before calling Uniden customer service -

PROBLEMSUGGESTION

TROUBLESHOOTING YOUR NEW

No dial tone

No power on the handset

Does not charge

Range is limited

Check that the phone line cord connectors at both ends are pushed in until they click.

If you have had a power failure or have unplugged the base unit, replace the handset on the base unit for two to five seconds to reset the system.

Check the handset has been registered (see page 11).

Check the battery pack plug, inside the battery compartment of the handset, is fully pushed in.

The handset rechargeable Ni-Cad battery pack may need to be charged.

Check the AC Adaptor is plugged in at both ends and switched On.

Make sure the charging contacts on both the handset and the base unit are in contact during charging.

The charging contacts may need to be cleaned with a dry cloth or pencil eraser.

The battery pack may need to be discharged first before a full charge can be accomplished.

Check the AC Adaptor is plugged in at both ends and switched On.

Make sure the base antenna is vertical.

Move the base unit so that it is centrally located in your residence or office and make sure that the base unit is not located near electrical appliances.

Calls received, flutter or fade

Cannot store or recall phone numbers from memory

The handset rechargeable battery pack may need charging.

You may be out of normal operating range. Move closer

When storing phone numbers, make sure that the handset is in the standby position.

When recalling stored numbers, check first for a dial tone.

18

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Start Installation & Safety Choosing the best location for your telephonePlace the handset on the Base PressPress firmly until it clicks into place Unit and charge itIii Contents Controls & Functions 900MHz Welcome Included in Your Package Refer to the ControlsWhen the battery charge becomes low Battery MaintenanceBattery use time per charge Cleaning the battery contactsEarpiece volume Headset InstallationRinger tone and volume Gently pullUsing Making and Receiving CallsCall Transfer Redial from talk modeRedialling a Call KEY Lock / Unlock Call WAITING/FLASHTravelling OUT of Range PAGING/INTERCOMUse redial/p to enter a pause. The screen displays P Storing Phone Numbers and NamesUse delete/page to delete digits as needed Display a Memory Number or Name Memory Dialing from Talk ModeMemory Dialing from Standby Chain DialingScreen displays Press and or enter a two-digit numberYou would like to edit At the beginning of the second linePress to move the pointer to YES Press and hold memory until Memory Store is displayedOr press memory to return to standby Name tagging When the Telephone RingsCaller ID Caller’s nameDeleting Information from the Caller ID List Viewing the Caller ID Message ListDeleting all Caller ID names/numbers Options Dial Prefix Using the Caller ID ListCalling a party from the Caller ID list Check the handset has been registered see Quick Reference ChartHandset rechargeable battery pack may need charging You may be out of normal operating range. Move closerOne Year Limited Warranty Toll Free 1300 366 Toll Free 0800 4 Uniden 864Thank YOU for Purchasing a Uniden Phone
Top Page Image Contents