HP 8-Channel 196 kSa/sec Digitizer plus DSP E1433A manual Module Features

HP E1433A User's Guide

Using the HP E1433A

Module Features

Data Flow Diagram and FIFO Architecture

The illustration on the next page shows data flow in the HP E1433A. In this example there are four 4-channel input assemblies for a total of 16 input channels. The data for all channels is sent to the FIFO. The FIFO is divided into sections, one for each channel. The data moves through a circular buffer (first-in-first-out) until a trigger causes it to be sent on to the VME Bus. The data can also be sent to the Local Bus if option UGH is present.

The size of the sections in the FIFO is flexible. The amount of DRAM memory for each channel is the total DRAM memory divided by the number of channels. The standard DRAM size is 4 MB; an optional 32 MB DRAM is available.

The trigger can be programmed to trigger on the input or on information from the software. The following are examples of ways a trigger can be generated.

￿input level or bound

￿source

￿external trigger

￿RPM level (with tachometer option AYE)

￿ttl_trigger (VXI backplane)

￿freerun (automatic)

3-15