HP E1433A User's Guide

Getting Started With the HP E1433A

The buttons on the right side of the SFP display are defined as follows:

Meas

This button opens the Measurement Control dialog box. You can set:

￿Measurement single/repeat

￿Mode block/continuous

￿Trigger auto/manual/input/source

￿Frequency span

￿Blocksize

Input

This button opens a dialog box in which you can set up the HP E1433A’s inputs. You can set:

￿Channel number

￿Range

￿AC or DC coupling

￿Grounding method

￿Digital anti-alias filter

￿Analog anti-alias filter

￿Trigger on/off

￿Trigger mode level/bound

￿Trigger level

￿Hysteresis

￿Trigger Slope

There is a checkbox to make all channels identical.

Source

This opens a dialog box for controlling the source output of the HP E1433A’s source. This is only available for HP E1433A’s that have the Arbitrary Source Option 1D4. You can set:

￿Channel number

￿Active on/off

￿Mode sine/burst sine/random/burst random

￿Ramp rate

￿Sine frequency

￿Sine phase

￿Output normal/grounded/open/cal/multi

￿Trigger on/off

￿Cola (Constant Output Level Amplifier) off/on

￿Duty Cycle

￿Sum off/on

￿Seed

￿Range

2-8

Page 26
Image 26
HP 8-Channel 196 kSa/sec Digitizer plus DSP E1433A manual There is a checkbox to make all channels identical