HP 8-Channel 196 kSa/sec Digitizer plus DSP E1433A manual To remove the front panel

HP E1433A User's Guide

Replacing Assemblies

To remove the front panel

1 Remove top cover, see “To remove the top cover.” Gently disconnect cables from the printed circuit assemblies. Using a T-8 torx driver, remove the two screws that attach the handles to the assembly. Pull out the handles making sure not to lose the two spacers.

2 Using a T-8 torx driver, remove the screw that attaches the front panel to the bottom cover. Gently pull the front panel off.

10-15